SMT Equipment: to focus on cost performance to focus on China

According to the Ministry of Industry and Information Published in 2009 Bulletin of economic operation of electronic information industry, marked by the international financial crisis of the electronics industry, from the second half of 2009, the electronic information industry is beginning to show signs of stabilization for the better. Since the second quarter of 2009, the focus of the monitoring of 27 electronic information products, to achieve positive growth in the product area expanded. By the end of December last year, personal computers, monitors, color TVs, mobile phones increased 33.3% yield, respectively, 7.2%, 9.6%, 10.7%. Taiwan imports Mounter year 5636, the second half of 2009, Taiwanese imports Mounter 3679, is the first half of the number of imports of 1.88 times the placement machine, the data clearly reflects China's SMT / EMS (SMT / Electronics Manufacturing Services) industry is rapidly recovering.
    Electronic manufacturing industry as a whole warmed
    Relevant information, in 2009 the domestic electronics manufacturing sector grew by 5.3%, which increased 14.4%, respectively 11,12 month and 19.8%. According to iSuppli analysis, the end of 2009, strong demand for electronic components. iSuppli report the latest research into after 2010, the factory capacity utilization more optimistic about the recovery, more obvious signs of warming. For most companies, the equipment running the second half of 2010 will promote the capacity utilization rate rose to more than 85% to 90%.
    Full boost by the drive electronics and information industry, recently held in Shanghai China International Electronic Production twentieth Equipment and Microelectronics Industry Exhibition (NEPCONChina2010) back to the busy scene before the crisis. Exhibiting many new products on display and more, the audience, and this more than three to make a lot of people have anticipated. Reed Josephine, vice president of East China in the "China Electronics News" interview, said: "NEPCON has been domestic electronics manufacturing side has the appeal and symbolic flag, always showing the wind vane's role. NEPCONChina2010 get home and abroad, e-business and related industries, the concern and active participation, this is the revival of the electronics industry and an important symbol of warming up fully. "
    Overall demand for the release of semiconductor components and production capacity, will also revitalize the electronics manufacturing and SMT market. In NEPCONChina2010, the concentrated expression of the electronics manufacturing industry, this happy trend. The exhibition brings together journalists found that Agilent, Assembléon, Siemens, Sony, Hitachi, Samsung, Panasonic, Fuji, Henkel, Yamaha, Tokyo heavy machine may be, fast, and many other subjects the main electronics manufacturers, while this year NEPCON more attractive to businesses for the first time exhibitors, such as the East Youda, Laban chemical, gherdi optoelectronics, Japan Activity Seiko, Wei Dian electronics. Thus, "three" phenomenon is not surprising.
    SMT industry significantly speed up recovery
    China Electronic Production Equipment Association data show that in 2009 China imported automatic placement machine 5636 units, 8.5 million, respectively, compared with 2008 decreased 28% and 38.5%. However, three months of 2009, 10,11,12 1786 Taiwan imported Mounter, 269 million U.S. dollars, respectively, compared with the same period in 2008, up 59.3% and 71.3%. The second half of 2009, Taiwan imported SMT 3679 is the first half of the imports of 1.88 times the number of SMT. These data clearly reflects China's SMT industry is recovering quickly.
    NEPCONChina show at this year's show focused on the latest technologies and products and market trends, and leading SMT equipment vendors alike were to lock eyes Chinese market, have increased investment in China. Sony Corporation of Japan to install the machine while the cause of Ministers Ishii grams in the "China Electronics News" interview, said that now is the equipment manufacturers a good time to invest in China. "Sony has always attached great importance to the Chinese market in the future we will more good products to China, not only sales, including manufacturing, we will put some of the manufacturing equipment in China, so that customers can not only significantly reduce the cost of ownership, will also have a faster response system, to meet customer requirements. "Ishii says gram.
    According to expert analysis, China's electronic information industry has formed a "bird" layout, birds head for the Yangtze River Delta, the Bohai Rim and Pearl River Delta as the wings, mainly in the western region in Chengdu as the birds tail. Josephine said that with China's SMT industry for the rapid recovery of the situation, NEPCON China, a series of activities will be "birds" as a blueprint for the layout will be firmly planted the flag NEPCON various strategic high ground. 2010 NEPCON follow the pace of industrial transfer, full advance is rising in the western region. NEPCON South China exhibition, the "Northern Tour" and the "middle of the trip" will be, Hubei, Hunan, central China and the Bohai Sea, Tianjin and northeast China as the focus for organizing conferences, road shows and a variety of activities.
    More user cost and performance value
    Components become smaller and smaller, more high-density assembly, assembly has become increasingly difficult, these are the growing challenges of electronic manufacturing, and lead-free, cost is the continuing development of electronics manufacturing requirements.
    May be Huangjun Rong, general manager of Greater China in the "China Electronics News" interview, said that after the crisis, customers are very sensitive to the cost. The new market conditions, have to be closer to customers, development of automation equipment, strengthening the degree of automation equipment, to the customer a better solution. "This year, we will introduce a new HorizoniX platform, he has three different levels, Horizon02iX, Horizon03iX and HorizonAPiX, if the customer's production now only need the lower ones, the future may be a high-level, then this machine is very right now with the basic model, the future can be upgraded, so customers have a cost in terms of is. "Huang Junrong said.
    Increasing accuracy is the consistent pursuit of equipment suppliers. Fujifilm (FUJI) show NXTII placement machine is a modular-type high-precision placement machine, the work of the newly developed V12 mount head can achieve high productivity, multi-mount first H08M and H04S apply to CSP, QFN and other medium-sized components of high-speed placement. Precision solder paste printer GPX-HD is a special deal with 01 005 (0402) and other small components required. According to reports, NXTII capacity can increase 30%. Their concern about this very popular machine in the field.

View this post on my blog: https://www.choosehpcomputer.com/hp-computer-deals/smt-equipment-to-focus-on-cost-performance-to-focus-on-china.html